Please Call Us On:
0800 072 3697

Hours:
Mon-Fri: 9:30am - 5pm UTC

Based in Worcestershire, UK

Registered Address (not trading address):
1st Floor Huxley House, 11 William Street,
Redditch, Worcestershire B97 4AJ

Company No: 13484985
Vat No: 265 887 643

Registered in England

For more information please visit our contact page.

Walkin’ Front Splint

£31.00£45.98 inc. VAT

Residents not in the U.K. please Contact Us for purchasing and shipping.

Overview

How to put on the Walkin’ Front Splint

 

The Walkin’ Front Splint for dogs and cats assists with injuries to the lower front limbs that need to be splinted or braced. Modeled after human splints, the Front Splint provides stability and support for the lower front limbs of your pet (carpal and paw).

  • Constructed of waterproof hard plastic exterior, soft interior foam padding, non-skid pad on bottom, and touch-fastener closures.
  • Front Splint extends above carpal and completely under the foot, giving full support to bottom of your pet’s leg.
  • Keeps pet’s leg in normal walking position.
  • Supports and stabilises carpal and paw areas of front limbs.
  • Allows weight to be put on the broken or weak limb.
  • Reduces the standard cost of bandaging and casting.
  • Lightweight design increases the pet’s tolerance of the splint.
  • Provides an easy way to provide daily wound therapy.

To get more of a custom fit add Walkin’ Custom-fit Foam for an additional £9.95

It may take a few days for your cat or dog to become acclimated to the feeling of walking around with a splint, but our unique design will have them feeling comfortable quickly.

Please Note: There is no “right” or “left” leg or paw designated for splints; splints may be used for either the right or left leg/paw. If you order a splint and it is marked with “L” it refers to the size (Large).

Sizing

Please keep in mind that the Walkin’ Front Splints are designed to support the lower part of the legs. They will not stabilize the elbow on the front leg. Please check with your local veterinarian before using the splint on your dog or pet.

If you have a cat and are interested in these splints, you will need to order the XXSmall or XSmall Splint, depending on the size of your cat. See chart.

front splint measurement
measure paw

A: Measure from end of longest toenail to midpoint between carpal pad and elbow.
B: Measure from end of longest toenail to just above carpal pad.
C: To measure paw width, place dog’s paw on ground so there is a natural splay, and measure the widest part.

It is recommended that you measure the dog in a standing position, if possible.
If joint is swollen due to arthritis or other medical condition, go up a size to accommodate swelling, and adjust fit adjust fit using the Walkin’ Splint Custom Fit Foam.

SizeABCWeight Range
XXSmall5.75″3″1″under 10 lbs.
XSmall7.75″4.25″1.75″10-25 lbs.
Small9″5″2″25-40 lbs.
Medium10.25″6″2.25″40-65 lbs.
Large11″7″2.5″65-85 lbs.
XLarge11.5″7.25″2.75″85+ lbs.

XXSmall

A5.75″
B3″
C1″
Weight Rangeunder 10 lbs.

XSmall

A7.75″
B4.25″
C1.75″
Weight Range10-25 lbs.

Small

A9″
B5″
C2″
Weight Range25-40 lbs.

Medium

A10.25″
B6″
C2.25″
Weight Range40-65 lbs.

Large

A11″
B7″
C2.5″
Weight Range65-85 lbs.

XLarge

A11.5″
B7.25″
C2.75″
Weight Range85+ lbs.

Please Note: There is no “right” or “left” leg or paw designated for splints; splints may be used for either the right or left leg/paw. If you order a splint and it is marked with “L” it refers to the size (Large).

How to Measure for a Walkin’ Pet Splint

 

Custom Fit Foam

 

Walkin’ Splints Custom-fit Foam can give your Walkin’ Splint a more custom fit to provide optimal comfort for your pet. Using the included Walkin’ Splints templates, the adhesive-backed foam can be cut and trimmed to fit any size or type of Walkin’ Splint (front, rear, hock, carpal, bootie). Then peel the backing and adhere to your splint for a custom fit without the cost!

  • 9″ X 12″ adhesive-backed foam.
  • 1/4″ thick, Closed Cell Foam Sheet
  • Easy to cut and trim foam.
  • Pattern templates included to match every size and type of Walkin’ Splint.
  • Instructions included with templates.
  • Gives Splint a better custom fit for an additional $9.95

Instructions:

Every pet is different, and their needs will vary. The Walkin’ Splint Custom-fit Foam template is a guideline for the most common shapes needed to customize the fit of your Walkin’ Splint. Each template can be cut, trimmed, or altered for your pet’s comfort – every pet is different!

  1. Choose a pattern template that matches the type of splint you have (front, rear, hock, carpal, bootie).
  2. Cut template from pattern sheet, choosing the size that matches your splint size.
  3. Trace or tape cut shape to paper-backed side of foam sheet.
  4. Carefully cut shape.
  5. Before removing backing, check fit, and trim if necessary.
  6. Once completely satisfied with fit of splint on pet’s leg, peel backing and adhere to splint.

Please note: If additional support is needed, foam can be stacked.

You may also like…